HP OmniBook 5000 Notebook PC - Manual (Page 52)

51
5. Remove the new memory-expansion board from its packaging and position it over
the connectors. Press in the board until it seats fully.
6. Replace the slot cover.
7. Insert the battery.
8. Press the reset button, in the small opening on the left side of the OmniBook—see
“To reset the OmniBook” . When prompted, run the System Configuration utility to
save the new memory configuration.
9. In Control Panel, double-click the Enhanced icon, then choose Virtual Memory and
Change.
10. First clear the Use 32-Bit File Access option—then select this option again. This
updates the Cache Size setting.
11. Choose OK to save the new setting. When prompted, choose Restart Windows to
activate the new setting.
Preparing the New Memory
You don’t need to adjust any settings after installing memory in your OmniBook.
Windows normally adjusts it settings automatically according to the amount of memory
present and the amount of unused disk space available on drive C.
Preparing the
New Memory