HP Color LaserJet CP6015 Printer series - Manual (Page 39)

Item Sub-item Values Description
especially when printing on lightweight paper or on
jobs with heavy toner coverage.
MEDIA TEMP NORMAL (default)
REDUCED
Set this feature to REDUCED if you are having
problems with paper sticking together in the output
bin.
ENVIRONMENT OFF (default)
ON
Optimizes performance in extreme low-
temperature environments.
Set this feature to ON if the product is operating in
a low-temperature environment and you are
having problems with print quality such as blisters
in the printed image.
LINE VOLTAGE OFF (default)
ON
Optimizes performance in low-voltage conditions.
Set this feature to ON if the product is operating in
a low-voltage environment and you are having
problems with print quality such as blisters in the
printed image.
CLEANING FREQUENCY NORMAL (default)
ALTERNATE
Set this feature to ALTERNATE if you are seeing
defects in the printed output that repeat at 38 mm
(1.5 inch) intervals. This feature increases the
frequency at which the C roller is cleaned. Setting
this feature to Alternate might also reduce printing
speed and increase the frequency of consumable
replacement.
D-BLADE BIAS NORMAL (default)
ALTERNATE
Set this feature to ALTERNATE if you are seeing
short white vertical lines in the printed output. The
Alternate setting might also cause dark spots in the
printed output, so be sure to test this setting on a
few print jobs.
WASTE BIN NORMAL (default)
ALTERNATE
Try setting this feature to ALTERNATE if you are
seeing lengthwise toner streaks in your printed
output, especially in jobs with low toner coverage.
BACKGROUND OFF (default)
ON
Select ON if pages are printing with a shaded
background. Using this feature can reduce gloss
levels.
HEAVY MODE 30 PPM (default)
24 PPM
The default setting is 30 PPM. Select the 24 PPM
option to reduce the speed and improve fusing on
heavy paper.
TRACKING CONTROL ON (default)
OFF
Improves color stability by adjusting the bias
voltage. This setting should remain ON.
RESTORE OPTIMIZE Use this feature to return all the settings in the
Optimize menu to the factory-default values.
QUICK CALIBRATE
NOW Performs a partial product calibration.
FULL CALIBRATE NOW Performs all product calibrations.
ENWW Configure device menu 25