HP Color LaserJet CP6015 Printer series - Manual (Page 103)

Supported paper types
Table 7-4 Tray 1 paper information
Type Specifications Quantity Driver settings Paper orientation
Paper and cardstock,
standard sizes Range:
60 g/m 2 (16 lb) bond to
220 g/m 2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Equivalent to 100
sheets of 75 g/m
2 (20
lb) bond.
Plain or unspecified Load preprinted or
prepunched paper
facing down, with the
bottom edge leading
into the tray, or toward
the front of the product
Envelopes Less than 60 g/m 2 (16
lb) bond to 90 g/m 2 (24
lb) bond
Up to 10 envelopes Envelope Short edge leading,
flap toward the back of
the product, facing up
Labels Maximum 0.23 mm
(0.009 in) thick Maximum stack height:
10 mm (0.6 in) Labels Side to be printed on
facing down
Transparencies Minimum 0.13 mm
(0.005 in) thick Maximum stack height:
10 mm (0.6 in) Transparencies Side to be printed on
facing down
Heavy 0.13 mm (0.005 in)
thick Maximum stack height:
10 mm (0.6 in) Light glossy, glossy, or
heavy glossy Side to be printed on
facing down
Glossy Range:
75 g/m 2 (20 lb) bond to
220 g/m 2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in) Light glossy, glossy, or
heavy glossy Side to be printed on
facing down
Photo media 60 g/m 2 (16 lb) bond to
220 g/m 2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in) Light glossy, glossy, or
heavy glossy Side to be printed on
facing down
Cut sheet paper 60 g/m 2 (16 lb) bond to
220 g/m 2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in) Plain or unspecified Side to be printed on
facing down
Tough paper 60 g/m 2 (16 lb) bond to
220 g/m 2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in) HP Tough paper Side to be printed on
facing down
Banner paper Range:
75 g/m 2 (20 lb) bond to
220 g/m 2 (58 lb) bond
Maximum stack height:
10 mm (0.6 in) Plain or unspecified Side to be printed on
facing down
CAUTION: Do not use banner media heavier than 120 g/m 2 with the optional 3–bin stapler/stacker or
the optional booklet maker finisher. Heavy banner media is not supported for these products.
Table 7-5 Trays 2, 3, 4, and 5 paper information
Type Specifications Quantity Driver Settings Paper orientation
Paper and cardstock,
standard sizes Range:
60 g/m 2 (16 lb) bond to
220 g/m 2 (58 lb) bond
500 sheets of 75 g/m 2
(20 lb) bond.
Plain or unspecified Load preprinted or
prepunched paper
facing up, with the top
toward the front of the
tray or toward the left-
hand side of the tray.
Labels Maximum 0.13 mm
(0.005 in) thick Maximum stack height:
54 mm (2.1 in) Labels Side to be printed on
facing up
Transparencies Minimum 0.13 mm
(0.005 in) thick Maximum stack height:
54 mm (2.1 in) Transparencies Side to be printed on
facing up
ENWW Supported paper types 89