HP Color LaserJet CP6015 Printer series - Manual (Page 111)

3. Slide the tray into the product. The control panel shows the tray type and size configuration. To
specify custom dimensions, or if the type is not correct, press the checkmark button
when the
control panel prompts to change the size or type.
4. Select CUSTOM, and then input the X and Y dimensions of the custom paper size.
NOTE: Refer to the label in the paper tray, or to the figure below, to determine the X and Y
dimensions.
Y
X
5. If the configuration is correct, press the back arrow .
Load large-size paper into Tray 3, 4, or 5
Use the following instructions if you are loading 11x17, RA3, SRA3, or 12 x 18-sized paper into Tray 3,
4, or 5.
1. Slide open Tray 3, 4, or 5.
2. Adjust the paper width guide by squeezing the adjustment latch and sliding the guide to the size
of the paper being used.
3. Load the paper into the tray.
4. Move the paper stop lever to the correct position for the paper being used.
ENWW Load paper and print media 97