HP Color LaserJet CP6015 Printer series - Manual (Page 107)

Print envelopes
If your software does not automatically format an envelope, specify Landscape for page orientation in
your software program or printer driver. Use the following guidelines to set margins for return and
destination addresses on Commercial #10 or DL envelopes:
Address type Left margin Top margin
Return 15 mm (0.6 in) 15 mm (0.6 in)
Destination 102 mm (4 in) 51 mm (2 in)
For envelopes of other sizes, adjust the margin settings accordingly.
Load banner paper into Tray 1
You can print banners from 457 mm (18 in) to 915 mm (36 in) in length and from 99 mm (4 in) to 320
mm (12.6 in) in width. See
Banner printing on page 118 .
CAUTION: Do not use banner media heavier than 120 g/m 2 with the optional 3–bin stapler/stacker or
the optional booklet maker finisher. Heavy banner media is not supported for these products.
Load Trays 2, 3, 4, or 5
Trays 2, 3, 4, and 5 each hold up to 500 sheets of standard paper or a 54 mm (2.13 in) stack of labels
or other thick paper.
Load standard-sized paper into Trays 2, 3, 4, or 5
The product automatically detects the following standard sizes of paper in the 500-sheet trays: Letter,
Letter Rotated, Legal, Executive, 11x17, A3, A4, A4 Rotated, A5, B4 (JIS), and B5 (JIS).
CAUTION: Do not print envelopes or unsupported sizes of paper from the 500-sheet trays. Print on
these types of paper only from Tray 1.
1. Slide the tray from the product.
NOTE: Do not open the input tray while it is in use. Doing so can cause jams in the product.
ENWW Load paper and print media 93