Enww control-panel messages 187 – HP Color LaserJet CP6015 Printer series User Manual
Page 201
Control panel message
Description
Recommended action
CARD SLOT FILE OPERATION FAILED
To clear press
(Checkmark button)
A PJL file system command attempted to
perform an illogical operation.
Press the checkmark button
to clear.
CARD SLOT FILE SYSTEM IS FULL
To clear press
(Checkmark button)
A PJL file system command could not store
something on the file system because the file
system was full.
Press the checkmark button
to clear.
CARD SLOT IS WRITE PROTECTED
To clear press
(Checkmark button)
The file system device is protected and no
new files can be written to it.
Press the checkmark button
to clear.
CHECKING OUTPUT DEVICE
An error has occurred with the output device. Remove and reinstall the output device.
Checking paper path
The product is checking for possible paper
jams.
No action is necessary.
Checking printer
The product is conducting an internal test.
No action is necessary.
CHOSEN PERSONALITY NOT
AVAILABLE.
To continue press
(Checkmark
button)
A print job requested a product language
(personality) that is not available for this
product. The job will not print and will be
cleared from memory.
Print the job by using a printer driver for a
different printer language, or add the
requested language to the product (if
possible). To see a list of available
personalities, print a configuration page. (See
.)
CLEANING DISK
Do not power off
For help press (Help button)
The product is cleaning the hard disk or a
compact flash disk.
Do not turn off. The product will automatically
restart when cleaning is complete. Product
functions are unavailable.
Cleaning...
A cleaning page is being processed.
No action is necessary.
Clearing event log
This message is displayed while the event log
is cleared. The product will exit the menus
once the event log has been cleared.
No action is necessary.
Clearing paper path
The product is attempting to eject jammed
paper.
Check progress at the bottom of the display.
CLOSE LOWER RIGHT DOOR
The lower right door is open.
Close the lower right door.
CLOSE RIGHT DOOR
For help press (Help button)
A door on the right side of the product is open.
1.
Close the door.
2.
If the message persists, contact
HP Support at
.
CLOSE TOP COVER
The top cover is open.
Close the top cover.
CODE CRC ERROR SEND FULL RFU ON
And error has occurred during a firmware
upgrade.
If the message persists, contact HP Support
COLOR RFU FAILED SEND FULL RFU ON
And error has occurred during a firmware
upgrade.
If the message persists, contact HP Support
CONNECT OUTPUT DEVICE
No external output device is installed.
1.
Turn power off.
2.
Connect output device product cable.
3.
Turn power on.
To continue without output device, turn power
off, remove the output accessory bridge, and
then turn power on.
Table 12-1
Control-panel messages (continued)
ENWW
Control-panel messages 187