HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 63)

Command line 63
Item Description
MaxSpeedType
(Optional)
The maximum connection speed for any Ethernet connection attached to this network.
Valid values include "Unrestricted" and "Custom". "Custom" enables you to configure
the preferred speed. The default value is "Unrestricted".
MaxSpeed
(required if
MaxSpeedType is
"Custom)
The maximum connection speed for any Ethernet connection attached to this network.
Valid values range from 100Mb to 10Gb in 100Mb increments.
Examples
->set network MyNetwork State=Disabled
Disables an existing network named MyNetwork
->set network Blue Name=Red
Changes the name of an existing network from Blue to Red
->set network GreenNetwork SmartLink=Enabled
Enables the SmartLink feature on the specified network
->set network network1 NativeVLAN=Disabled
Disables the network native VLAN tagging
->set network network1 Private=Disabled
Disables the private network property
->set network Network1 Private=Enabled
Enables a private network
->set network Network1 Nags=NetworkGroup2,NetworkGroup3
Changes the network access groups for Network1 to network access groups
NetworkGroup2 and NetworkGroup3 (previous network access groups are removed)
->set network Network1 VlanId=150
Changes the VLAN ID of a network associated with a shared uplink set
->set network Network1 VLanTunnel=Enabled
Enables VLAN tunneling on the network
->set network Network1 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=6000
Modifies the network to a preferred connection speed of 4Gb and a maximum
connection speed of 6Gb
Item Description
show network Display all Ethernet networks in the domain.
Configured values for ConnectionMode and VLanTunnel display for UNSHARED
networks only.
Configured values for NativeVLAN, UplinkSet, and VLanID display for SHARED
networks only.
Syntax
show network [|*]
Parameter
NetworkName
(optional)
The name of an existing network in the VC domain. Use "*" to display a detailed view
of all the networks. If not specified, a summary view of the networks appears.
Examples
->show network
Displays a summary of all networks
->show network *
Displays detailed information for all networks
->show network MyNetwork
Displays detailed information for a specific network