HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 151)

Configuring the Virtual Connect domain using the CLI 151
9
Start with FCoE-capable
modules in Bays 1 and 2,
then create a profile and
add connections.
Port Connected to
1 Bay 1
2 Bay 2
Bay 1 Bay 2
—
—
— —
— —
Port Connected to
1 Bay 1
2 Bay 2
3 Bay 1
4 Bay 2
5 Bay 1
6 Bay 2
7 Bay 1
8 Bay 2
Add connection, 6 times
10
Start with 8 FCoE-capable
modules, then create a
profile and add
connections.
Port Connected to
1 Bay 1
2 Bay 2
3 Bay 3
4 Bay 4
5 Bay 5
6 Bay 6
7 Bay 7
8 Bay 8
Bay 1 Bay 2
Bay 3 Bay 4
Bay 5 Bay 6
Bay 7 Bay 8
Port Connected to
1 Bay 1
2 Bay 2
3 Bay 3
4 Bay 4
5 Bay 5
6 Bay 6
7 Bay 7
8 Bay 8
9 Bay 1
10 Bay 2
11 Bay 3
12 Bay 4
13 Bay 5
14 Bay 6
15 Bay 7
16 Bay 8
17 Bay 1
18 Bay 2
19 Bay 3*
20 Bay 4*
21 Bay 5*
22 Bay 6*
23 Bay 7*
24 Bay 8*
25 Bay 1
26 Bay 2
*Not mapped
Add connection, 18
times
Logging out of the CLI
To log out of the CLI, use the exit command:
>exit
Common management operations
The following table provides the syntax for the most commonly used management operations.
For more information on a particular command, see "Managed elements (on page
18 )."