HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 49)

Command line 49
Item Description
SpeedType (optional) The requested operational speed for the server port. Valid values include
"Auto", "Preferred", and "Custom". The default value is "Preferred".
If the speed type is "Auto", the maximum port speed is allocated but is
constrained by the maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as the
preferred speed of the network to which the connection is associated. If no
preferred speed is configured for a network, the speed type defaults to "Auto".
If the speed type is "Custom", you can configure a speed (using the Speed
property) from 100Mb to the MAX configured speed for the network in 100Mb
increments.
Speed (required if the
SpeedType is Custom)
The user-defined speed for the server port. Valid values include from 100Mb to
the MAX configured speed for the network in 100Mb increments.
Examples
->add iscsi-connection MyNewProfile Network=SomeNetwork
Adds a new iSCSI connection to the profile
->add iscsi-connection MyNewProfile
Adds a new iSCSI connection and leaves it unassigned
->add iscsi-connection MyNewProfile
AddressType=Factory-Default
Adds a new iSCSI network connection and uses factory-default addresses
->add iscsi-connection MyNewProfile
AddressType=User-Defined iScsiMAC=00-17-A4-77-00-00
Adds a new iSCSI network connection and provides a user-defined MAC
address
->add iscsi-connection MyProfile Network=MyNetwork
SpeedType=Preferred
Adds a new iSCSI network connection and sets the speed to Preferred
->add iscsi-connection MyProfile Network=MyNetwork
SpeedType=Custom Speed=2000
Adds a new iSCSI network connection and sets the speed to 2Gb
Item Description
remove
iscsi-connection
Remove the last iSCSI connection from the server VC profile. If no connections
exist, an error message appears.
Syntax
remove iscsi-connection
Parameter
ProfileName (required) The name of an existing profile from which the connection is being removed
Example
->remove iscsi-connection MyProfile
Removes the last added iSCSI connection from the profile
Item Description
set iscsi-connection Modify the properties of a specified iSCSI connection.
Syntax
set iscsi-connection [Network=
Name>] [SpeedType=]
[Speed=]
Parameters
ConnectionID
(required)
The ID of an existing iSCSI connection. The ID format is .