HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 30)

Command line 30
Item Description
Parameter
ProfileName (required) The name of the profile from which the Ethernet connection is removed
Example
->remove enet-connection MyProfile
Removes an Ethernet network connection from a profile
Item Description
set enet-connection Modify an Ethernet connection of a server profile.
Syntax
set enet-connection
[Network=]
[PXE=]
[SpeedType=] [Speed=]
Parameters
ProfileName (required) The name of the server profile that contains the connection to modify
Port (required) The port number of the connection being modified
Properties
Network (optional) The name of the Ethernet network to associate with the connection. This
applies to Ethernet network connections only. A blank string makes the
Ethernet connection unassigned.
PXE (optional) Enables or disables PXE on a connection. Valid values are "enabled",
"disabled", and "UseBios". This applies to Ethernet network connections
only.
PXE can be enabled on one connection per profile.
SpeedType (optional) The requested operational speed for the server port. Valid values include
"Auto", "Preferred", and "Custom". The default value is "Preferred".
If the speed type is "Auto", the maximum port speed is determined by the
maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as the
preferred speed of the network to which the connection is associated. If no
preferred speed is configured for a network, it defaults to "Auto".
If the speed type is "Custom", you can configure a speed from 100Mb to
MAX configured speed for the network in 100Mb increments.
Speed (required if the
SpeedType is Custom)
The user-defined speed for the server port. Valid values include 100Mb to
MAX configured speed for the network in 100Mb increments.
Examples
->set enet-connection MyProfile 2
Network=NewNetworkName
Changes the associated network of an Ethernet connection
->set enet-connection RedProfile 1 Network=""
Sets a network connection to "Unassigned"
->set enet-connection GreenProfile 3 PXE=disabled
Disables PXE on an Ethernet connection
->set enet-connection MyProfile 1 SpeedType=Preferred
Modifies the Ethernet network connection to set the speed to "Preferred"
->set enet-connection MyProfile 1 SpeedType=Custom
Speed=2000
Modifies the Ethernet network connection to set the speed to 2Gb
Item Description
show enet-connection Display the Ethernet connections associated with the server profiles.