HP Integrity NonStop J-Series - Manual (Page 174)

NonStop AutoTMF Commands
HP NonStop AutoTMF Software User’s Guide—429952-017
6-98
SECURITY
SECURITY
Instructs the monitor to accept further commands only from a specific set of process
access ids.
N | C | U | A | G | O | -
the Guardian security specifier. The user issuing the command must match the
monitor process access id at the specified security level.
BACKUPCPU
The BACKUPCPU command specifies the cpu for the monitor backup process.
cpu
the cpu number of the backup monitor process, in the range of 0 to 15,
If cpu omitted, the backup process is terminated.
SWITCH
The SWITCH command causes the monitor primary and backup processes to
exchange roles.
MONITOR SECURITY { N | C | U | A | G | O | - }
MONITOR BACKUPCPU [ cpu ]
MONITOR SWITCH