HP XP7 Storage - Manual (Page 89)

2. In the summary section in the Replication window, view the following information:
•
Licensed Capacity
The used and licensed capacity of each software application.
•
Number of Replica LDEVs
The number of LDEVs used for replication.
•
Number of FC Z/FCSE Relationships
The number of FC Z and FCSE relationships that are in use.
•
Number of Differential Tables
The number of differential tables that are in use and the differential table limit in a XP7
storage system.
NOTE: FS does not use differential tables.
This number does not include the number of differential tables that FC Z/FCSE Relationships
use.
3. In the Replication window, in the Replica LDEVs tab, view the following information:
•
LDEV ID
The selected LDEV's identification number. Click the ID to open the LDEV Properties
window. Use this window to search for pool information.
•
LDEV Name
The selected LDEV's name.
•
Emulation Type
The selected LDEV's emulation type.
•
Capacity
The selected LDEV's capacity.
•
Copy Type
The copy type for the pair you selected.
Values:
- FS: FS pair
BC, FS, BCMF Z, Cnt Ac-S, Cnt Ac-S Z, Cnt Ac-J, and Cnt Ac-J Z volume status:
- Primary: P-VOL
- Secondary: S-VOL
FC Z and FCSE volume status:
- S-Normal: The source volume in the normal status. S means a source volume.
- T-Normal: The target volume in the normal status. T means a target volume.
- ST-Normal: The normal volume which is set for the source volume and the target volume.
- S-Failed, S-Full, S-Full & Failed: The source volume in the abnormal status.
- T-Failed, T-Full, T-Full & Failed: The target volume in the abnormal status.
- ST-Failed, ST-full, ST-full & Failed: The abnormal volume which is set for the source
volume and the target volume.
NOTE: If you have not configured a pair, a hyphen (-) is shown.
4. (Optional) To download table information to a file, click Export.
Monitoring pair information 89