HP XP7 Storage - Manual (Page 66)

3. In the Select Primary Volumes window of the Create Pairs wizard, complete the following and
then click Next:
•
Use Primary Volumes of Fast Snap Pairs
Select the kind of volumes you want to show in the Available LDEVs table:
Values:
- Yes: The LDEVs that are already used as P-VOLs are shown in the table.
- No: The LDEVs that are not used as P-VOLs are shown in the table. If you select No, you
must select a pool (see
“Selecting a pool as your primary volume” (page 68) ).
Default: No
•
(Optional) Port ID
Select the LDEV’s LUN path port identification number for which you want to filter the
Available LDEVs table.
Default: CL1-A
•
(Optional) Host Group Name
Select the LDEV’s LUN path host group name for which you want to filter the Available
LDEVs table.
Default: Any
•
From the Available LDEVs table, select the LDEV you want to assign as the P-VOL and
click Add.
The LDEV is moved to the Selected LDEVs table.
NOTE: An Online Migration volume will not appear in the Selected LDEVs table.
66 Managing Fast Snap Pairs