HP XP7 Storage - Manual (Page 125)

1. In the RWC main window, in the resource tree in the Explorer, click Pools > Pools.
2. In the Pools window, in the Pools tab, select the check box for the pool with the warning
threshold that you want to change from the list and then click More Actions > Edit Pools.
3. In the Edit Pools window of the Edit Pools wizard, complete the following and then click Finish:
Warning Threshold
Type the data pool warning threshold. Set the threshold to a rate that is not 50%, even though
the value shown in the window does not exceed the threshold.
Range: 20 - 95%, in 1% increments.
Managing pools 125