HP XP7 Storage - Manual (Page 151)

Cause of error RAID Manager command SSB2
The command ended abnormally because you specified a volume as the FS
P-VOL and that volume has an emulation type other than OPEN-V. paircreate, pairsplit,
pairresync, pairresync
-restore 9729
You cannot create the FS pair because the volume you specified as the FS P-VOL
has the command device setting. paircreate 972A
You cannot create the FS pair because the capacity of the volume you specified
as the FS P-VOL exceeds the supported size. paircreate 972C
Note: The supported size is 4 TB.
You cannot create the FS pair because the capacity of the volume you specified
as the FS S-VOL exceeds the supported size. paircreate 972E
Note: The supported size is 4 TB.
You cannot create the FS pair because you specified a V-VOL as the FS P-VOL. paircreate 972F
You cannot create the FS pair because you specified a pool-VOL as the FS P-VOL. paircreate 9730
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-S P-VOL share
the volume, and the Cnt Ac-S pair is not split (“PSUS” status) or suspended and
blocked (“PSUE” status). pairresync -restore 9731
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-J P-VOL share
the volume, and the Cnt Ac-J pair is not split (“PSUS” status) or suspended and
blocked (“PSUE” status). pairresync -restore 9732
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-S S-VOL share
the volume. pairresync -restore 9733
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-J S-VOL share
the volume. pairresync -restore 9734
You cannot create the FS pair because you specified Cnt Ac-J's journal volume
as the FS P-VOL. paircreate 9735
The command ended abnormally because the LDEV number of the volume you
specified as the FS S-VOL is beyond the specified range. All commands 973B
The command ended abnormally because you specified an unmounted volume
as the FS S-VOL. All commands 973C
The command ended abnormally because you specified a blocked volume as
the FS S-VOL. paircreate, pairsplit,
pairresync, pairresync
-restore 973D
The command ended abnormally because you specified a volume that is in
process of being shredded or formatted as the FS S-VOL. paircreate, pairsplit,
pairresync, pairresync
-restore 973E
The command ended abnormally because you specified a volume whose
emulation type is other than OPEN-V as the FS S-VOL. paircreate, pairsplit,
pairresync, pairresync
-restore 973F
You cannot create the FS pair because the volume you specified as the FS S-VOL
has the command device setting. paircreate 9740
You cannot create the FS pair because you specified an external volume as the
FS S-VOL. paircreate 9742
You cannot create the FS pair because you specified a volume other than V-VOLs
as the FS S-VOL. paircreate 9745
You cannot create the FS pair because you specified a pool-VOL as the FS S-VOL. paircreate 9746
You cannot create the FS pair because you specified a Cnt Ac-S P-VOL as the
FS S-VOL. paircreate 9747
Troubleshooting with RAID Manager 151