HP XP Continuous Access Software User Manual
Page 153
Figure 71 DKC Status Window
The DKC Status window shows the following:
•
List:
No.: Serial numbers used for rows in the list
◦
◦
Path Status: Status of a logical path (for details, see
)
◦
Port: A port on the local storage system
◦
Pair-Port: A port on the remote storage system.
•
S/N: The serial number and LDKC number of the remote storage system.
•
Controller ID: The controller ID and the model name of the remote storage system.
•
Path Gr. ID: A path group ID.
•
M-R Path: The type of channel interface between the local and the remote storage systems.
This column displays Fibre.
•
Minimum Paths: The minimum possible number of paths between the local and the remote
storage systems.
•
RIO MIH Time: The RIO MIH timer value, which is the wait time until a data transfer from the
local storage system to the remote storage system is complete.
•
DKC Registered: The date and time when the local and the remote storage systems are
associated with each other.
•
Last Updated: The date and time when the last operation on a logical path to the remote
storage system was performed.
•
Refresh the DKC Operation tab after this window is closed:If you select this check box,
information in the DKC Operation window refreshes after you close the DKC Status window.
Viewing the Status of Logical Paths
153