HP StorageWorks XP Remote Web Console Software User Manual
Page 160
Table 38 Error Code and Error Contents When Operating RAID Manager (continued)
Error Content
Error Code
(SSB2)
Error Code
(SSB1)
The command was rejected because the specified volume is the volume other than
P-VOL.
C22D
The command was rejected because the pairsplit command specifying -P option
(write protection of P-VOL) was issued to the volume that status is not PAIR.
C22E
The command was rejected because the S-VOL status is SMPL.
C233
The command was rejected because an internal logical error has occurred.
C234
C235
C236
C237
The command was rejected because the specified volume is the volume other than
P-VOL.
C238
The command was rejected because the pair resync was operated to the volume
which status is other than PSUS, PSUE, or PDUB.
C239
The command was rejected because an internal logical error has occurred.
C23A
The command was rejected because the volume status is SMPL.
C23B
The command was rejected because the volume status is other than PAIR or COPY.
C23C
The command was rejected because the command for XP Continuous Access
Synchronous was issued to the XP Continuous Access Asynchronous volume.
C23D
Pair cannot be created because the command was issued to the command device.
C267
The command was rejected because the specified consistency group number is
invalid.
C271
The command was rejected because the takeover command was issued to the volume
which status is not SSWS.
C28B
The command was rejected because RCU is not registered or the registered RCU
information is invalid.
C28C
There is no volume to which the takeover command can be executed.
C28D
The command was rejected because an internal logical error has occurred.
C28E
The command was rejected because the specified volume is used for S-VOL.
C297
Pair cannot be created because the capacity that is used by other than XP Continuous
Access Synchronous and XP Continuous Access Asynchronous exceeds the license
capacity.
C2A0
The command was rejected because an internal logical error has occurred.
C2A1
Pair cannot be created because the used capacity of XP Continuous Access
Synchronous exceeds the license capacity.
C2A3
Pair cannot be created because the used capacity of XP Continuous Access
Asynchronous exceeds the license capacity.
C2A4
The command was rejected because the changing of TP-VOL capacity is in progress.
C2B3
The command was rejected because an internal logical error has occurred.
C2B4
Pair cannot be created because the XP Continous Access P-VOL is being initialized
by XP Business Copy.
C2B5
The command was rejected because the releasing pages in TP-VOL is in progress.
C2B6
160 Troubleshooting