HP StorageWorks XP Remote Web Console Software User Manual
Page 131
Figure 52 Pairsplit-r Dialog Box (Synchronous and Asynchronous)
The pairsplit options are:
•
Volume: Port - GID - LUN of the selected volume.
If the pound or gate symbol (#) is added to the end of the device ID (00:00:3C #, for example),
the LDEV is an external volume. For details on external volumes, see the HP XP24000/XP20000
External Storage Software User's Guide.
If an X mark is added to the end of the device ID (00:00:3C X, for example), the LDEV that
the number indicates is a Thin Provisioning virtual volume. For details on virtual volumes, see
the HP XP24000/XP20000 Thin Provisioning Software User's Guide.
•
S-VOL Write (default = disabled):
Enable: The S-VOL of this pair will accept read and write I/Os while the pair is split. If
you select Enable and you want to resync the pair later, select S-VOL from the Suspend
◦
kind option on the Pairsplit-r dialog box to ensure that the P-VOL and S-VOL bitmaps are
Splitting XP Continuous Access Pairs
131