Setting snmp trap receivers – HP StorageWorks Enterprise File Services WAN Accelerator User Manual
Page 120
120
C
ONFIGURING
THE
HP EFS WAN A
CCELERATOR
5. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before saving them permanently.)
6. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting SNMP
Trap Receivers
You set SNMP traps in the Reports - SNMP Trap Receivers page.
Traps are messages sent by an SNMP agent that indicate the occurrence of an event.
For detailed information about SNMP traps sent to configured servers, see
The default setup does not complete SNMP traps.
To set an SNMP trap
1. Click the Setup tab to display the Setup menu.
2. Click Reports expand the Reports menu.
3. Click SNMP Trap Receivers to display the Reports - SNMP Trap Receivers page.
Figure 2-50. Reports - SNMP Trap Receivers Page
System Location
Specify the physical location of the router.
Read Only Community Name
Specify a string to identify the read-only community. For example: public.
Control
Description