HP XP Business Copy Software - Manual (Page 72)

72 ShadowImage for the XP1024/XP128/XP12000/XP10000/SVS 200
• The Apply button performs the SI390 operations displayed in the CTG List box. If an error occurs during
the operation, the consistency group or groups that the system failed to perform the intended operation
will remain in the CTG List box and the error code for each failed operation will be displayed under the
Code column.
• The Cancel button cancels all the ongoing operations specified in the CTG List box.
To perform CTG operations for the consistency group, select a consistency group in the CTG List box,
right-click to display the pop-up menu commands (Add CTG, Delete CTG, CTG Status, and Error Detail), and
then click the appropriate command (see ” The CTG List Box ” on page 72).
The CTG List Box
The CTG List box displays CTG-related information based on the options you select in the Tree View box.
Figure 36 CTG List Box
The CTG List box contains the following items:
• CTG: The registered ID of each consistency group.
• Group Status: The current status of each consistency group. Each consistency group is set to one of the
three types of status:
• Free: The consistency group is available for use.
• Reserved: The consistency group is set, but the volume pairs are not registered yet.
• Used: The consistency group is set and the volume pairs are already registered.
• Code: The error code in case the system fails to apply the setting successfully when you click Apply. For
more information about the failed operation, right-click and click the Error Detail command from the
pop-up menu.
The following table shows the commands in the pop-up menu that you can use to perform CTG operation
to one or more consistency groups of your preference in the CTG List box.
The CT Group Status Window
The CT Group Status window displays the information about the status of the selected consistency groups.
Table 19 List of pop-up menu commands for CTG operation
Command Feature
Add CTG Sets the reserve attribute for each CTG selected in the CTG List box.
Delete CTG Resets the reserve attribute for the CTG(s) selected in the CTG List box.
CTG Status Opens the CT Group Status window that displays the information about the selected consistency
group.
Error Detail Opens the Error window that displays the error code and error message describing the failed
operation.