Figure 92 – HP XP Business Copy Software User Manual

Page 145

same content represented by a different description, both requesting the withdrawal of all the

relationships established with the device numbered 4202.

Figure 90

Example of FCWITHDR Command Description (for Case 5)

By executing the command described above, the relations established with Dataset 1 and Dataset 2 in the

device numbered 4202 are withdrawn. As a result, there will no longer be any relationships established

with the device numbered 4202 after executing this command.

Figure 91

Example of FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES)

•

Case 6: FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES, XTNTLST parameter

specified)
Below are two examples of the command descriptions for Case 6. Both examples request the

withdrawal of all those relationships among the relationships established with the device numbered

4202 that are included in the extent specified by the XTNTLST parameter. When DDSW parameter is

set to YES, the TDEVN parameter values and the XTNLST parameter values for the copy target extent

are ignored. Therefore, the two command descriptions below both bear the same result.

Figure 92

Example of FCWITHDR Command Description (for Case 6)

FCWITHDR SDEVN(X'4202') DDSW(YES)

FCWITHDR SDEVN(X'4202') TDEVN(X'4203') DDSW(YES)

FCWITHDR SDEVN(X'4202') DDSW(YES) XTNTLST(X'010000000' X'1100000E' X'21000000' X'2200000E')

FCWITHDR SDEVN(X'4202') TDEVN(X'4203') DDSW(YES)

XTNTLST(X'010000000' X'1100000E' X'21000000' X'2200000E')

This manual is related to the following products: