HP NonStop G-Series - Manual (Page 89)

Switch Command Interface (SWCI)
ServerNet Nomadic Disk (Release 2) User’s Guide — 523968-001
6- 19
STATUS Commands
Displaying Switch Card Status Information
The STATUS SC command displays information about the switch cards. The command
can return information about all switch cards or a single switch card in a specified slot.
The information includes the position of the switch, the lock status, the part number,
and the track ID for the switch card.
If a slot does not contain a switch card, the part number for the switch card is displayed
as EMPTY and all other attributes are blank.
Examples
•
To retrieve status information about all switch cards in the switch module:
SWCI $NDSWA.#TERM>STATUS SC *
STATUS SC { * | slot-num [ , sc-attr ] }
* Displays the status of all switch cards in the switch
module.
slot-num Displays the status of a switch card. slot-num is
an integer in the range of 1 through 8 (the slot
number)
sc-attr Displays the status of a the specified attribute of a switch
card.
sc-attr is one of the following:
POSITION Displays the position (straight or
crossed).
LOCK Displays the lock status (locked or
unlocked).
PARTNO Displays the part number.
TRACKID Displays the track identification
number.
Switch Card Information:
SC Part Number Track ID Date of Manufacture Firmware Position Lock
--- ------------- -------- ------------------- -------- -------- --------
1 114117 A00-00 AAAAAB 04/13/1995 12:00:00 000001 STRAIGHT LOCKED
2 114117 A00-00 AAAAAC 04/13/1995 12:00:00 000001 CROSSED UNLOCKED
3 EMPTY
4 EMPTY
5 EMPTY
6 EMPTY
7 114117 A00-00 AAAAAD 04/13/1995 12:00:00 000001 STRAIGHT UNLOCKED
8 114117 A00-00 AAAAAE 04/13/1995 12:00:00 000001 CROSSED LOCKED