Assumptions, Example 5-1, Ndconfig on \pri – HP NonStop G-Series User Manual
Page 63
Switchovers
ServerNet Nomadic Disk (Release 2) User’s Guide — 523968-001
5 -3
Assumptions
Assumptions
For these examples, assume the following configuration:
•
The ServerNet Nomadic Disk volumes are connected to two nodes:
°
\PRI is the primary node.
°
\BCK is the backup node.
•
The ServerNet Nomadic Disk volumes are connected to the two nodes using
ServerNet Nomadic Disk fiber-optic switches in a standard configuration.
°
The primary disk drives are located at the primary site with \PRI.
°
The mirror disk drives are located at the backup site with \BCK.
•
The entire application environment (object files, control files, startup and shutdown
files, and so on) is located on Nomadic volumes.
•
and
show the contents of the Nomadic Disk Manager
configuration files used for the examples in this section. The
$SYSTEM.NOMADIC.NDCONFIG files are shown for \PRI and \BCK. For detailed
descriptions of all configuration statements, see
Example 5-1. NDCONFIG on \PRI
SET PATH P $SMPRI.#A 1 STRAIGHT
SET PATH B $SMPRI.#A 2 STRAIGHT
SET PATH M $SMBCK.#A 1 CROSSED
SET PATH MB $SMBCK.#A 2 CROSSED
SET VOL $DATA01
SET VOL $DATA02
SET VOL $DATA03
SET VOL $DATA04
SET VOL $DATA05
SET VOL $DATA06
SET VOL $DATA07
SET VOL $DATA08
SET VOL $DATA09
SET VOL $DATA10
SET VOL $DATA11
SET VOL $DATA12
SET VOL $DATA13
SET VOL $DATA14
SET VOL $DATA15
SET VOL $DATA16
ADD SEGMENT SEGMENT-1, DATA