HP NonStop G-Series - Manual (Page 87)

Switch Command Interface (SWCI)
ServerNet Nomadic Disk (Release 2) User’s Guide — 523968-001
6- 17
STATUS Commands
Table 6-2 describes the fields of information returned by the STATUS command.
Table 6-2. STATUS Command Field Descriptions
Heading Field Contents
SCC status information Part Number Part number and revision of SCC.
Track ID Tracking identification number of SCC.
Date of
Manufacture Date and time of manufacture of SCC.
Firmware SCC firmware revision.
PON Status of most recent power-on self-test on
SCC (PONOK or ERROR).
Switch card (SC) status
information for each switch
module (slots 1-8) Part Number Part number and revision for the switch card.
If no switch card is present in a slot, the Part
Number field contains EMPTY and all other
fields are blank.
Track ID Tracking code for the switch card.
Date of
Manufacture The switch card date and time of
manufacture.
Firmware The switch card firmware revision.
Position Current switch card position (STRAIGHT or
CROSSED). See
SWITCH Command on
page 6-22 for definitions of straight and
crossed.
Lock The switch card lock/unlock status (LOCKED
or UNLOCKED). See
LOCK Command on
page 6-11 for a definition of locked.
The switch control module
(SCM) environmental
information Power SCM power supply voltage.
Temp 1 SCM cabinet temperature sensor #1 reading.
Temp 2 SCM cabinet temperature sensor #2 reading.
Keyswitch SCM keyswitch position (LOCAL or
REMOTE).