HP NonStop G-Series - Manual (Page 88)

Switch Command Interface (SWCI)
ServerNet Nomadic Disk (Release 2) User’s Guide — 523968-001
6- 18
STATUS Commands
Displaying Switch Module Environmental Information
The STATUS ENV command displays environmental information about the switch
module. This includes information about the power supply voltage, temperature
readings inside the module, and the position of the key switch on the SCC.
env-attr specifies one of these environmental attributes:
If env-attr is not present, the STATUS ENV command displays all switch module
environmental information, including the power supply voltage, temperature, and key
switch information.
Examples
•
To retrieve general status information about the switch module:
SWCI $NDSWA.#TERM>STATUS ENV
SCM Environment: Power Temp 1 Temp 2 Keyswitch
------ ------ ------ ---------
5.70 V 35.7 C 35.9 C REMOTE
•
To request only power supply voltage information about the switch module:
SWCI $NDSWA.#TERM>STATUS ENV, POWER
SCM Environment: Power
------
5.70 V
•
To request only temperature information about the switch module:
SWCI $NDSWA.#TERM>STATUS ENV, TEMP
SCM Environment: Temp 1 Temp 2
------ -------
35.7 C 35.9 C
•
To request only the position of the key switch on the SCC in the switch module:
SWCI $NDSWA.#TERM>STATUS ENV, KEYSWITCH
SCM Environment: Keyswitch
---------
REMOTE
STATUS ENV [ , env-attr ]
POWER Displays only switch module power supply voltage.
TEMP Displays only switch module temperature sensor readings.
KEYSWITCH Displays only SCC key switch position.