HP NonStop G-Series - Manual (Page 6)

Contents
ServerNet Nomadic Disk (Release 2) User’s Guide— 523968-001
iv
A. Part Numbers
TMF Command 7-17
UP Command 7-17
VOLUMES Command 7-18
A. Part Numbers
B. Operational Considerations for Remote Mirroring
Powering On and Off a Remote I/O Enclosure B-2
Powering On a System With a Remote I/O Enclosure B-2
Powering Off a System With a Remote I/O Enclosure B-3
Index
Examples
Example 3-1. Sample TACLCSTM File Included with the Nomadic Disk
Manager
3-4
Example 5-1. NDCONFIG on \PRI 5-3
Example 5-2. NDCONFIG on \BCK 5-4
Figures
Figure 1-1. Remote Mirroring Before Switchover 1-3
Figure 1-2. Remote Mirroring After Switchover 1-5
Figure 2-1. Single Processor, Unextended, Internal Disk Drive Configuration 2-4
Figure 2-2. Single Processor, Unextended, External Disk Drive Configuration 2-5
Figure 2-3. Single Processor, Extended, Internal Disk Drive Configuration 2-7
Figure 2-4. Extended and Switched Internal Disk Drive Configuration 2-8
Figure 4-1. Switch Module Faceplate 4-2
Figure 4-2. Front Panel of a Switch Controller Card 4-3
Figure 4-3. Switch Card Faceplate 4-7
Figure 4-4. Switch Card Switch Positions 4-8
Figure 6-1. Optical Signal Paths for the Two Switch Positions 6-23