HP NonStop G-Series - Manual (Page 130)

Nomadic Disk Manager Interface
ServerNet Nomadic Disk (Release 2) User’s Guide — 523968-001
7- 10
LISTDEV Command
LISTDEV Command
Use the LISTDEV command to perform an SCF STATUS DISK command on a set of
objects.
SEGMENT { segname | * }
specifies which segments are affected by the LISTDEV command. You can
specify the volumes in only a particular segment (
segname ) or all volumes in all
segments ( * ).
If you do not include the SEGMENT parameter, the volumes in the current
segment are affected. An implicit LISTDEV command is performed following each
UP or DOWN command, whether that command is explicit or implicit.
Examples
ND> LISTDEV
ND> LISTDEV, SEGMENT *
ND> LISTDEV, SEGMENT ONE
LISTOPENS Command
Use the LISTOPENS command to perform a FUP LISTOPENS command on each
volume in one or more segments.
SEGMENT { segname | * }
indicates which segments are affected by the LISTOPENS command. You can
specify the volumes in a specific segment (
segname ) or all volumes in all
segments ( * ).
If you do not include the SEGMENT parameter, the volumes in the current
segment are affected.
Examples
ND> LISTOPENS
ND> LISTOPENS, SEGMENT *
ND> LISTOPENS, SEGMENT ONE
LISTDEV [ , SEGMENT { segname | * } ]
LISTOPENS [ , SEGMENT { segname | * } ]