HP StorageWorks XP Remote Web Console Software - Manual (Page 218)

Table 46 ResumePair Tag Parameters and Settings (continued)
Range/Character numbers Setting Parameter Column
00000 – 99999 Serial number of the remote storage system DKCSN G
N/A • Normal: the pair in Suspend will be
resynchronized. ResyncMode
1
H
N/A •
Group: all pairs in the same mirror will be
resynchronized.
•
Volume: only the specified pair in the mirror
will be synchronized.
Range 2 I
1 – 256
3
Priority of the operation Priority J
N/A • Group: all pairs in the same mirror will be
split when the error occurs.
•
Volume: only the pair specified in the mirror
will be split when the error occurs.
ErrorLevel K
N/A Specify the current setting (Only_P-VOL or
Copy_to_S-VOL). For information about the
meaning of each setting, see
“AddPair Tag
Parameters and Settings” (page 215) .
CFW L
1 Use Business Continuity Manager to resynchronize a pair for the delta resync operation.
2 If Group is specified for Range, the settings for Priority, ErrorLevel, and CFW will be ignored.
3 When creating a pair, a smaller priority number indicates a higher priority. When creating many pairs at a time,
specifying the Priority parameter may not be enough to manage the priority of pair creation. To be assured of establishing
priority for specified pairs, HP recommends separate spreadsheets for high-priority pairs and other pairs.
Save time by using the pair information to write the parameters of the ResumePair tag. For details
see
“Pair Tag Parameters and Contents” (page 214) .
Releasing Pairs (DeletePair Tag)
You can perform the CLI by using the spreadsheet with DeletePair tag from either the primary or
secondary site. The table below shows the items and detailed information for the DeletePair tag
settings.
Table 47 DeletePair Tag Parameters and Settings
Range/Character numbers Setting Parameter Column
00 – 01 LDKC number of the primary data volume LDKC A
00 – FE CU number of the primary data volume CU B
00 – FF LDEV number of the primary data volume LDEV C
00 – 03 Mirror ID MirrorID D
N/A •
P-VOL: The data volume in the local storage system
is the primary data volume.
•
S-VOL: The data volume in the local storage system
is the secondary data volume.
VolType 1 E
00 – 01 LDKC number of the remote storage system LDKC(Pair) F
00000 – 99999 Serial number of the remote storage system DKCSN G
218 Using Spreadsheets for Universal Replicator for Mainframe Operations