HP XP P9000 for Compatible High Perf FICON Connectivity Software - Manual (Page 190)

Description Item
Restores the last applied settings in the window. When you click this button, all the changes
displayed with the blue text in the window are canceled. Reset
Changes the settings in this window as explained below, and then applies the resulting settings
to the storage system: Initialize
• All the ports become prioritized ports.
•
The threshold value for all the ports becomes 0 (zero).
•
The window will display a hyphen (-) instead of 0 (zero).
• If the All Thresholds check box is checked, the check mark disappears.
Closes the Performance Control main window. Close
WWN tab of the Performance Control main window
Use this tab to set the limit on the performance of non-prioritized WWNs and set the threshold on
the performance of prioritized WWNs.
Description Item
The current system control. Current Control
Status
•
Port Control: The system is controlled by the upper limits and threshold specified in the Port
tab.
•
WWN Control: The system is controlled by the upper limits and threshold specified in the
WWN tab.
•
No Control: The system performance is not controlled by Performance Control.
Tip: If Port Control appears when the WWN tab is active, click Apply to switch control so that
WWN Control is displayed.
190 Performance Control GUI reference