HP NonStop G-Series - Manual (Page 24)

e) Opens the STOPPE file in block mode edit, so you can set the
corresponding process names in the STOPPE file that you specified in the
STRTPE file so that all processes will be successfully stopped.
e.1 Note: Again, if you are not using CLIMs on your NonStop system, you
will need to disable the CLIM collector modules from running by
commenting out the following lines:
STOP $ZPE08
STOP $ZPE08
f) Opens the PECONF file in block mode edit.
To change the Collator process name or the default values for entities
being collected.
g) Opens the WRKCONF file in block mode edit.
To change the TCP/IP port number at which the NonStop collection
modules can be accessed by the agents on the Central Managed Node
(CMS), modify the 'Port' value corresponding to the PE Worker object
module section in the WRKCONF file.
h) Opens the RSTCOLL file in block mode edit.
To change the Collator process name.
h.1 Note: Again, if you are not using CLIMs on your NonStop system, you
will need to disable the CLIM collector modules from running by
commenting out the following lines:
STOP $ZPE08
STOP $ZPE08
RUN PECIP /NAME $ZPE08, NOWAIT, TERM $ZHOME /
RUN PECLIM /NAME $ZPE09, NOWAIT, TERM $ZHOME /
Performance Essentials HP SIM Client and NonStop & Linux Host User Guide – 544813 – 004
24