HP NonStop G-Series - Manual (Page 21)

4.2. NonStop Agent Install
4.2.1. Instructions and Requirements
Please refer to Hardware and Software Requirements for required hardware and
software.
1. FTP the following files to $system.zpe.
(Note: The user may FTP the files to a different $volume.subvolume.)
If you are installing using IPSetup (DSM/SCM Compatible), then after IPSetup
has complete, the files will be FTPed to subvolume E0832H02 for the H-series
and R0832V02 for the G-series, you do NOT need to FTP these files, so please
continue on to Step 2.
If you are installing manually, please follow the FTP instructions.
The following files have to be transferred in 'BINARY' Mode:
* CACERT
* COLLATE (Only H & J-series)
* COLLMON (Only H & J-series)
* CPROCAPP
* CSVRAPP
* HSCCOLL (Only H & J-series)
* HSCWRK
* LISTAPP
* MEASCOL (Only H & J-series)
* MEASSVR (Only G-series)
* PECIP (Only H & J-series)
* PECLIM (Only H & J-series)
* PETMPAK
* PROCMAN
* PSVRAPP
* SERVCERT
* SERVKEY
Performance Essentials HP SIM Client and NonStop & Linux Host User Guide – 544813 – 004
21