HP ProLiant BL10e G2 Server Blade - Manual (Page 96)

Command Line Interface
Table 4-5: Enclosure Management Commands continued
Command Description Restrictions
SET ENCLOSURE
UID [ON |
OFF] Turns the enclosure Unit Identification
LED on or off Only enclosure administrators
may execute this command.
SET RACK NAME
Sets the name for the rack where the
enclosure resides Only enclosure administrators
may execute this command.
The must be 1-32
characters long and includes all
alphanumeric, dash, and
underscore characters.
The default rack name is
“UnnamedRack.”
SHOW BAUDRATE Shows the baudrate settings for blades
1-20 and switches A, B. Only enclosure administrators
may execute this command.
SHOW CONFIG Displays the script required to recreate
the settings of the enclosure
Passwords are not included for any
user.
Only enclosure administrators
may execute this command.
SHOW DATE Displays the current date, time, and
time zone of the internal clock of the
enclosure. None
SHOW DISPLAY
EVENT Displays whether event notification is
on or off. None
SHOW
ENCLOSURE FAN
[
| ALL] Displays the status, redundancy,
partner, speed, and part number for
the requested fan.
If ALL is entered, this information is
shown for all fans.
None
SHOW
ENCLOSURE
INFO Displays the enclosure name, type,
part number, serial number, and asset
tag; the Integrated Administrator
software and hardware version;
Integrated Administrator MAC address;
and the interconnect tray type, part
number, and serial number. None
continued
4-18 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM