HP ProLiant BL10e G2 Server Blade User Manual
Page 52

Web-Based User Interface
Figure 3-10: Virtual Buttons screen (Enclosure Power
area)
You can select the appropriate function with the following buttons:
•
•
Restart Integrated Administrator restarts the Integrated Administrator and
does not affect the server blades.
IMPORTANT: Click Restart Integrated Administrator only at the direction of HP
support personnel. You must click Apply for these settings to take effect.
Power Off Enclosure attempts a graceful shutdown of the system for 5 minutes,
after which time this command powers down all components of the enclosure
immediately.
IMPORTANT: Whenever possible, HP recommends that you use the operating system
shutdown procedures before powering down a server blade or enclosure. After the
enclosure is powered off, powering on can only occur by local access to the system.
3-20
HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: d-ch3 Web-Based User Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:42 AM