Setting up ip security, Setting up automatic time configuration (ntp), Setting up ip security -25 – HP ProLiant BL10e G2 Server Blade User Manual
Page 140: Setting up automatic time configuration (ntp) -25
Setting Up the System
Setting Up IP Security
IP security allows an administrator to define a set of IP addresses that are the only
ones allowed to connect to the services provided (SSH, HTTP, TELNET, SNMP).
This means that an administrator can make sure only a certain set of machines have
access to Integrated Administrator. A maximum of five IP addresses can be entered.
Table 5-4: IP Security Commands
Function Command
Add an IP address
ADD IPMANAGER
Remove an IP address
REMOVE IPMANAGER
Enable IP Security
ENABLE IPSECURITY
Disable IP Security
DISABLE IPSECURITY
Setting Up Automatic Time Configuration (NTP)
Automatic time configuration allows the Integrated Administrator to synchronize its
date and time with a server supporting the Network Time Protocol (NTP).
Table 5-5: Automatic Time Configuration Commands
Function Command
Set the NTP poll interval*
SET NTP POLL
Set the primary NTP server
SET NTP PRIMARY
Set the secondary NTP server
SET NTP SECONDARY
Disable the secondary NTP server
SET NTP SECONDARY NONE
Enable NTP
ENABLE NTP
Disable NTP
DISABLE NTP
HP ProLiant BL e-Class Integrated Administrator User Guide
5-25
HP CONFIDENTIAL
Writer: Hilary Stead File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:50 AM