HP ProLiant BL10e G2 Server Blade - Manual (Page 92)

Command Line Interface
Table 4-4: Enclosure Network Configuration Commands continued
Command Description Restrictions
SET GATEWAY
address> Sets the network default gateway
This gateway is only used if the system
is configured to use a static IP
address.
Only enclosure administrators may
execute this command.
The needs to be in
the form ###.###.###.### where
each ### ranges from 0 to 255.
SET
IPCONFIG
[DHCP
{DYNAMICDNS
} | STATIC
address>
] Sets up the Integrated Administrator IP
configuration
The gateway and DNS addresses are
cleared. The optional DYNAMICDNS
argument enables Dynamic DNS.
Only enclosure administrators may
execute this command.
The and
need to be in the form
###.###.###.### where each ###
ranges from 0 to 255.
SET SNMP
COMMUNITY
[READ |
WRITE]
name> Sets the community name for the read
or write SNMP community
The default names for the read and
write community are “public” and blank,
respectively. If a blank write community
name is given, SNMP set commands
are disabled until a non-empty
community name is given.
Only enclosure administrators may
execute this command.
The write must
be 0-20 characters long, and the
read must be
1-20 characters long. Both include
all alphanumeric, the underscore,
and the dash characters.
The default read community name
is “public.” The default
write community name is blank.
SET SNMP
CONTACT
Configures the name of the system
contact
The default contact is blank.
Only enclosure administrators may
execute this command.
The must be 0-20
characters long and includes all
alphanumeric characters, the
underscore, the dash, and the
space.
If spaces are part of this
information, enclose the information
in quotes.
continued
4-14 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM