HP ProLiant BL10e G2 Server Blade - Manual (Page 111)

Command Line Interface
Table 4-8: Functionality Exclusive to the Command Line Interface continued
Function Description Capability Exclusive to the
Command Line Interface
Enclosure Management Commands, continued
SHOW ENCLOSURE
POWERSUPPLY
[number> | ALL] Displays the status of the power
supply, AC input status, capacity,
input voltage range #1 (measured in
Volts), input voltage range #2
(measured in Volts), input frequency
range (measured in Hertz), part
number, serial number, and
hardware revision for the specified
power supply if one is specified or
for all power supplies if ALL is given. The command line adds the input
voltage ranges, input frequency
range, serial number, and
hardware revision.
SHOW ENCLOSURE
STATUS Under an enclosure status heading,
this command displays the health of
the enclosure, Integrated
Administrator health, and unit
identification LED.
Under a power status heading, this
command displays the power status
and capacity.
The command line adds the
Integrated Administrator health
UPDATE IMAGE
Downloads a new image from a
server over the network and uses
the image to upgrade the firmware of
the enclosure. All
UPLOAD CONFIG
Uploads the current runtime
configuration to the specified FTP or
TFTP server. All
CLEAR SESSION
BAY number> Terminates a Terminal session from
the enclosure.
This is not a graceful termination.
The connected user loses any
unsaved work.
All
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-33
HP CONFIDENTIAL
Writer: Hilary Stead File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:46 AM