Removing trap targets, Removing trap targets -30 – HP ProLiant BL10e G2 Server Blade User Manual
Page 145

Setting Up the System
5-30
HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Hilary Stead File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:50 AM
Removing Trap Targets
To remove a trap target list using the Web-based user interface:
1. Click the Enclosure tab.
2. Click SNMP Configuration in the left panel.
3. Type the list name in the appropriate field of the SNMP area.
4. Click Remove.
5. Click Apply.
To add or remove a trap target list using the CLI, enter:
REMOVE SNMP TRAPRECEIVER
The
0 to 255.
This manual is related to the following products: