Configuring ignite-ux – HP Matrix Operating Environment Software User Manual

Page 23

In the Job Properties window, make sure that the modified Erase ProLiant Hardware job
displays, then click OK to close the window.

Configuring Ignite-UX

Insight Orchestration supports Ignite-UX version C.7.11.439 (HP-UX 11.31 1009) or later for
HP-UX 11iv3 deployment. (HP-UX 11iv3 0709 or later is required for Integrity VM.)

The Ignite server must have NFS configured as well as the tftp and bootps services enabled in
/etc/inetd.conf

To setup NFS and export the directories Ignite needs, run:

/opt/ignite/lbin/setup_server –n

To enable tftp and bootps services, edit /etc/inetd/conf, and uncomment the "tftp" and
"bootps" lines and then run:

inetd –c

Depending on the client being installed (for example, if the client has a graphics card or keyboard
attached), you may be prompted to identify the keyboard language. To avoid this, edit /var/
opt/ignite/config.local

by adding the following line:

kdblang="PS2_DIN_US_English"

Configuring deployment servers