HP Matrix Operating Environment Software - Manual (Page 43)

8 The utilization meter (bar graph) displays network I/O throughput data, if available. The
data is a 5-minute average that is calculated and updated on 5-minute boundaries. If the
data cannot be displayed, the meter is dimmed (as in the meter in the next box below) and
a label indicates the probable cause. For a description of meter labels, see
“Utilization meter
status/error information” (page 127) .
Using VM Manager with Insight Dynamics - VSE for Integrity, you can click a meter to view
a snapshot of Capacity Advisor historical data for network I/O; this feature is not provided
when using VM Manager from HP SMH.
For more information about using VM Manager to collect and view utilization data, see
Chapter 7 (page 111) .
9 Allows you to perform an action on the virtual machine or I/O device. Select the box, then
select an action from one of the menus available on the VM Manager menu bar.
Network devices
VM Manager displays icons to represent certain network devices. You can hover your cursor
over the icon to see text describing the representation.
Table 4-2 describes these icons.
Table 4-2 Network device icons
Description Icon
Physical or virtual network card
Virtual switch
Virtual LAN (VLAN)
A question mark within the device icon, such as , indicates that the type of device cannot
be determined. The device type cannot be determined, for example, when the device has been
removed from the VM Host but not from the virtual machine.
Screen details
Network tab column layout
Figure 4-7 depicts the column layout for the VM Host Network tab.
VM Host view 43