Canon imagePROGRAF iPF825 - Manual (Page 921)

Messages regarding printheads
Cannot adjust printhead. ................................................................................................................................. 905
Cannot adjust band. ........................................................................................................................................ 905
PHead needs cleaning. ................................................................................................................................... 906
Wrong printhead. ............................................................................................................................................. 906
Problem with Printhead ................................................................................................................................... 906
Printhead error ................................................................................................................................................ 906
No printhead .................................................................................................................................................... 906
Execute printhead cleaning. ............................................................................................................................ 907
Cannot adjust printhead.
Cause Corrective Action
The Printhead noz-
zles are clogged. Execute Auto Head Adj. again, as follows.
1. Press the Online button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
→P.813
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
→P.815
4. Execute Auto Head Adj. again.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
→P.676
The Printhead can-
not be aligned; high-
ly transparent film is
loaded. Press the Online button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjust-
ment.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
→P.676
The Printhead is in-
stalled crooked. Straighten the Printhead as follows, and then execute Auto Head Adj. again.
1. Press the Online button to clear the error.
2. Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
→P.680
3. Execute Auto Head Adj. again.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
→P.676
Cannot adjust band.
Cause Corrective Action
The Printhead nozzles are clog-
ged. Execute Auto Band Adj. again, as follows.
1. Press the Online button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
→P.813
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
→P.815
4. Execute Auto Band Adj. again.
(See "Auto Band Adjustment (Auto Band Adj.).")
→P.685
Error Message > Messages regarding printheads >
iPF825 Cannot adjust printhead.
13
905