Canon imagePROGRAF iPF825 - Manual (Page 480)

Paper Source
You can select the paper source.
The following settings are available for paper source.
Setting Details
Cut Sheet Select to print on the cut sheet.
Roll Paper 1 Select to print on the roll paper of Roll Paper 1 (Upper).
Roll Paper 2 Select to print on the roll paper of Roll Paper 2 (Lower).
Roll Paper Width
This selects the width of the roll media set to the printer.
Note
• Available only if rolls are selected in Paper Source.
Copies
You can input the number of print copies in numerical characters.
Note
• The maximum value is 999.
• You can change the numbers by clicking either ▲ button or ▼ button.
Restore Defaults Button
Click the button to reset to the setting when starting Preview.
Print Button
Click the button to begin printing.
Update Printer Info. Button
Click the button to acquire printer information.
Mac OS X Software > Preview >
Paper Settings Panel iPF825
5
464