Canon imagePROGRAF iPF825 - Manual (Page 869)

Note
• If you do not find any scraps or jams, see "Troubleshooting When Paper Jams are not Found."
→P.853
6.
If the Carriage is on the left, move the Carriage to the right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
7.
Lower the Release Lever and close the Top Cover.
8.
Turn the printer on. (See "Turning the Printer On and Off.") →P.702
Troubleshooting When Paper Jams are not Found
If you cannot find a paper jam, search for the paper as follows.
1.
Turn the printer off. (See "Turning the Printer On and Off.") →P.702
2.
Remove the Wheeled Output Stacker from the printer. (See "Using the Wheeled Output Stacker.") →P.671
Troubleshooting > Problems Regarding Paper >
iPF825 Troubleshooting When Paper Jams are not Found
12
853