Canon imagePROGRAF iPF825 - Manual (Page 720)

1.
Make sure no print jobs are in progress.
If the Message lamp is flashing, check the message on the Display Screen and take action as necessary.(See "Error
Messages
→P.886 .")
If the Data lamp is flashing, the printer is receiving a print job. Turn off the printer only after printing is finished.
2.
Hold down the Power button for more than a second.
After "Shut Down.. Please Wait.." is shown on the Display Screen, the printer shuts off.
Printer Modes
Printer modes are classified as follows and described in this topic.
• Modes →P.704
• Mode transition →P.706
• Online, and state of the Control Panel →P.707
• Offline, and state of the Control Panel →P.707
• Menu mode, and state of the Control Panel →P.709
• Submenu mode, and state of the Control Panel →P.709
Modes
The printer has five modes as follows:
Printer Parts > Control Panel >
Printer Modes iPF825
9
704