Brother MFC 8220 - Manual (Page 88)

6 - 6 SETUP SEND
Fax Resolution
When you have an original document in the ADF you can use the
Resolution key to change the setting temporarily (for this fax only).
If it is not illuminated in green, press ( Fax ). Press
Resolution repeatedly until the LCD shows the setting you want.
—OR—
You can change the default setting.
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu , 2 , 2 , 2 .
3
Press or to select the
resolution you want.
Press Set .
4
Press Stop/Exit .
Standard: Suitable for most typed original documents.
Fine: Good for small print and transmits a little slower than
Standard resolution.
S.Fine: Good for small print or artwork and transmits slower
than Fine resolution.
Photo: Use when the original document has varying shades
of gray. This has the slowest transmission time.
Setup Send
2.Fax Resolution