Brother MFC 8220 - Manual (Page 105)

AUTO DIAL NUMBERS AND DIALLING OPTIONS 7 - 2
3
Press or to select
Fax/Tel (or E-Address ).
Press Set .
4
Enter the phone or fax number (up to 20 digits).
Press Set .
—OR—
If you purchased the optional NC-9100h, you can select
E-Address in Step 3 and press Set .
■
If you want to enter a pause in the dialling sequence (for example,
to access an outside line), press
Redial/Pause as you are
entering the digits.
Each key press of
Redial/Pause enters a 3.5 second pause
when the number is dialled, displayed by a dash on the screen.
5
Use the dial pad to enter the name (up to 15 characters).
Press Set .
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press Set to store the number without a name.
6
Go to Step 2 to store another One-Touch number.
—OR—
Press Stop/Exit .
When you dial an auto dial number, the LCD shows the name
and number you have stored, or, if you have not stored a name,
only the number you have stored.
One-Touch Dial
Fax/Tel