Brother MFC 8220 - Manual (Page 52)

3 - 13 ON-SCREEN PROGRAMMING
If you installed optional LAN board (NC-9100h), the LCD shows
the following LAN menu.
Main Menu Submenu Menu
Selections Options Descriptions Page
6 .LAN
(option)
1 .Setup
TCP/IP
1 .BOOT
Method
Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that
best suits your
needs.
See
Network
User’s
Guide
on the
CD-ROM.
2 .IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3 .Subnet
Mask
[000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
4 .Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5 .Host Name BRN_XXXXXX Enter the Host name.
6 .WINS
Config
Auto
Static
You can choose the
WINS configuration
mode.
7 .WINS
Server
Primary
Secondary
Specifies the IP
address of the
primary or secondary
server.
The factory settings are shown in Bold with “ ”.
to accept
to
exit
Press the Menu numbers.
(ex. Press 1, 1 for Mode Timer)
— OR —
Select & Set Select & Set