Step 2: connecting the nc-9100h to – Brother MFC 8220 User Manual

Page 180

Text mode
Original mode

13 - 8 OPTIONAL ACCESSORIES

Step 2: Connecting the NC-9100h to an
Unshielded Twisted Pair 10BASE-T or
100BASE-TX Ethernet Network

To connect the NC-9100h to a 10BASE-T or 100BASE-TX Network,
you must have an Unshielded Twist Pair Cable. One side of the cable
must be connected to a free port on your Ethernet hub and the other
side must be connected to the 10BASE-T or 100BASE-TX connector
(an RJ45 Connector) of the NC-9100h.

Verifying successful hardware Installation:

Plug in the AC power cord. After initialization and warm-up (this may
take several seconds), the machine will come to a Ready state.