Brother MFC 8220 - Manual (Page 81)

SETUP RECEIVE 5 - 13
Sequential Polling
The MFC can request original documents from several fax units in a
single operation. You just specify several destinations in Step 5.
Afterward, a Sequential Polling Report will be printed.
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu , 2 , 1 , 8 .
3
Press or to choose
Standard , Secure or Timer .
Press Set when the screen displays the setting you want.
4
If you selected Standard , go to Step 5.
■
If you selected Secure , enter a four-digit number and press
Set , and then go to Step 5.
■
If you selected Timer , enter the time (in 24-hour format) you
want to begin polling and press Set , and then go to Step 5.
5
Specify the destination fax machines (up to 382), which you
wish to poll by using One-Touch, Speed-Dial, Search, a Group
(see Setting up Groups for Broadcasting on page 7-5) or the dial
pad. You must press
Set between each location.
6
Press Start .
The MFC polls each number or group in turn for a original
document.
Press Stop/Exit while the MFC is dialling to cancel the polling
process.
To cancel all sequential polling receive jobs, press Menu , 2 , 6 .
(See Cancelling a scheduled job on page 6-9.)
Setup Receive
8.Polling RX