Brother MFC 8220 - Manual (Page 61)

GETTING STARTED 4 - 6
General Setup
Setting the Mode Timer
The MFC has three temporary mode keys on the control panel: Fax,
Copy and Scan. You can change the number of seconds or minutes
the MFC takes after the last Copy or Scan operation before it returns
to Fax mode. If you select Off, the MFC stays in the mode you used
last.
1
Press Menu , 1 , 1 .
2
Press or to select
0 Sec , 30 Secs , 1 Min , 2 Mins ,
5 Mins or Off .
3
Press Set .
4
Press Stop/Exit .
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you
are using.
1
Press Menu , 1 , 2 .
—OR—
If you have the optional paper tray,
press
Menu , 1 , 2 , 1 to set the paper
type for Tray #1 or Menu , 1 , 2 , 2
to set the paper type for Tray #2 .
2
Press or to select Thin , Plain , Thick , Thicker or
Transparency .
3
Press Set .
4
Press Stop/Exit .
You can select Transparency only when A4 , Letter or
Legal is selected in Menu , 1 , 3 for Tray #1 and Tray #2.
General Setup
1.Mode Timer
General Setup
2.Paper Type
Paper Type
1.Tray #1