Using a cordless external handset, Changing the remote codes, Using a cordless external handset -10 – Brother MFC 8220 User Manual
Page 78: Changing the remote codes -10
5 - 10 SETUP RECEIVE
Using a cordless external handset
If your cordless telephone is connected to the correct socket on the
MFC and you typically carry the cordless handset elsewhere, it is
easier to answer calls during the Ring Delay. In Fax/Tel mode if you
let the MFC answer first, you will have to go to the MFC so you can
press
Tel/R
to transfer the call to the cordless handset.
Changing the remote codes
Remote Codes might not work with some telephone systems. The
preset Remote Activation code is
51
. The preset Deactivation
code is
# 51
.
1
If it is not illuminated in green, press
(
Fax
).
2
Press
Menu
,
2
,
1
,
4
.
3
Press
or
to
select
On
(or
Off
).
Press
Set
.
4
Enter the new Remote Activation code.
Press
Set
.
5
Enter the new Deactivation code.
Press
Set
.
6
Press
Stop/Exit
.
If you are always disconnected when accessing your external
TAD remotely, try changing the Remote Activation code and
Deactivation code to another three-digit code (such as
###
and
998
).
Setup Receive
4.Remote Code